Know-how · Installation

FD 440 – Installation & first start-up

Step by step: connect the pump and chamber, switch on the power and run the first cooling and vacuum test. Choose your pump and language – video and guide follow your choice.

Pump

Language

Installation & first start-up

What’s in the box, six assembly steps, then the first check: wait 20 minutes, switch on cooling, test the vacuum.

Guide (PDF)Portrait video (phone)Landscape video

Vacuum test of the pump

All connections checked and still no vacuum? This test shows whether the pump itself reaches enough vacuum: sensor directly on the pump, target 30 mTorr or less.