Used Vacuum Pumps›Busch›R5 RA / RB

Busch · R5 RA / RB

Busch R5 RB — rotary vane, 20 CFM with vapor trap

Original title: Busch 20 CFM Rotary Vane Vacuum Pump RC-0025-0406-1102 & FTS Systems Vapor Trap

€2.372▼ 18% below market

Market median (sold): €2.883 from 78 sales in this family

📍 USA

🟡 OK with refurb

Suitable for WAVE101/FD260 after typical refurbishment and inspection.

Condition from photo

Exterior shows age and dust accumulation; no visible oil leaks or damage. Vapor trap included. Motor and pump housing intact.

Likely refurb / add-ons

  • Oil change and filter service (~€80)
  • Bearing/seal inspection (~€150)
  • Soft-starter module (~€280)

Watch out for

  • Age and dust suggest storage; internal wear cannot be assessed from photos.
  • Vapor trap condition and seal integrity not visible.

WAVE AI estimate from photo + specs only — not a substitute for our physical pre-purchase check.

Specifications

Type
Oil-sealed rotary vane
Pumping speed
~10 m³/h
Water-vapour tolerance
~50 g/h
Ultimate vacuum
≤ 0.1 mbar
Source
eBay
Listing #
eBay #177794244450
Last verified
Jul 17, 2026

Fits WAVE machines: WAVE101, FD260

Type plate (AI reading)

Exact model
Busch R5 RB (type designation from listing and family match)
Serial
B25559-0406-1102 (from FTS Systems label visible in image 2)
Type
R5 RB
Displacement
2 L (approx., typical for R5 RB)
Pumping speed (typical)
~10 m³/h (20 CFM)
Ultimate vacuum (typical)
≤0.1 mbar
Water-vapour tolerance (typical)
~50 g/h
Oil type
Mineral oil (standard Busch)

Auto-extracted from one of the listing photos. Verify on the real unit before purchase.

What to look for on this family

Oil-sealed rotary vane with gas-ballast. Robust workhorse. Check ballast valve is intact and oil is clear amber. Run gas-ballast open under water vapour load.

Manufacturer datasheet — Busch R5 RA / RB

Design
Single-stage oil-sealed rotary vane pump with gas ballast
Pumping speed (50 Hz)
10 – 100 m³/h (RA 0010 – RA 0100)
Ultimate pressure
≤ 0.1 mbar
Water-vapour tolerance
approx. 50 – 330 g/h
Inlet flange
DN 25/40 ISO-KF
Motor power
0.55 – 3.0 kW
Speed (50 Hz)
1500 1/min
Oil type
Busch VM 100 (mineral)
Oil fill
0.5 – 4.0 l
Oil-change interval
approx. 500 – 2000 operating hours, depending on application
Motor protection class
IP55
Manufacturer
Busch Vacuum Solutions

Curated from the manufacturer's official datasheet for this family / model. The specific pump may vary slightly by variant.

W

WAVE Advisor

Questions & advice · AI

Hi! I answer questions about freeze drying and help you choose a suitable WAVE machine. How can I help?

AI advisor · prices are indicative; a binding quote comes from the WAVE team.