Used Vacuum Pumps›Busch›R5 RA / RB

Busch · R5 RA / RB

Busch RA 0063 E — rotary vane, 0.5 mbar

Original title: Busch RA 0063 E Vakuumpumpe | 0,5 mbar + Elektromotor 0616127187 | 1,5 kW

€1.900▼ 34% below market

Market median (sold): €2.883 from 78 sales in this family

📍 Germany

🟡 OK with refurb

Suitable for WAVE101/FD260; typical refurb needed before use.

Condition from photo

Externally clean, motor and pump housing intact, oil level and hoses present, minor dust/weathering on exterior.

Likely refurb / add-ons

  • Oil change + filter service (~€110)
  • Exhaust filter replacement (~€80)
  • Soft-starter for motor (~€280)

Watch out for

  • Age (2009): internal wear not visible; request pump-down curve or recent service
  • Price €1,900 is below median (€2,948) — verify pump performance before purchase.

WAVE AI estimate from photo + specs only — not a substitute for our physical pre-purchase check.

Specifications

Type
Oil-sealed rotary vane
Pumping speed
~10 m³/h
Water-vapour tolerance
~50 g/h
Ultimate vacuum
≤ 0.1 mbar
Year
2009 (per nameplate)
Source
eBay
Listing #
eBay #127362411488
Last verified
Nov 18, 2026

Fits WAVE machines: WAVE101, FD260

Type plate (AI reading)

Exact model
RA 0063 E
Serial
01050010
Year (plate)
2009
Type
RA 0063 E
Serial No.
01050010
Pressure p
0.5 hPa (mbar)
Oil
Busch VM 100, 2.00 L
Manufacturer
Busch Produktions GmbH, Schauinslandsstraße 1, D 79689 Maulb
Approvals
CE, IEC 34, IEC 38
Origin
Made in Germany

Auto-extracted from one of the listing photos. Verify on the real unit before purchase.

What to look for on this family

Oil-sealed rotary vane with gas-ballast. Robust workhorse. Check ballast valve is intact and oil is clear amber. Run gas-ballast open under water vapour load.

Manufacturer datasheet — Busch R5 RA / RB

Design
Single-stage oil-sealed rotary vane pump with gas ballast
Pumping speed (50 Hz)
10 – 100 m³/h (RA 0010 – RA 0100)
Ultimate pressure
≤ 0.1 mbar
Water-vapour tolerance
approx. 50 – 330 g/h
Inlet flange
DN 25/40 ISO-KF
Motor power
0.55 – 3.0 kW
Speed (50 Hz)
1500 1/min
Oil type
Busch VM 100 (mineral)
Oil fill
0.5 – 4.0 l
Oil-change interval
approx. 500 – 2000 operating hours, depending on application
Motor protection class
IP55
Manufacturer
Busch Vacuum Solutions

Curated from the manufacturer's official datasheet for this family / model. The specific pump may vary slightly by variant.

W

WAVE Advisor

Questions & advice · AI

Hi! I answer questions about freeze drying and help you choose a suitable WAVE machine. How can I help?

AI advisor · prices are indicative; a binding quote comes from the WAVE team.