Busch · Other
Busch 016-116 — rotary vane, 2 mbar, 0.55 kW
Original title: BUSCH 016-116 Vakuumpumpe EMG 101 mit Motor FN 80 50Hz 0,55KW 2mbar 0,5Ltr Used
📍 Germany
Suitability for 1 × FD440
Not verifiedItem type
Not confirmed
Technical
Cannot calculate
Condition
Not evidenced
Data
Family only
🟡 OK with refurb
Suitable for WAVE; typical refurb needed. Verify internal wear before use.
Condition from photo
Exterior shows age and light surface corrosion; motor and pump housing intact. Oil level and internal condition not visible.
Likely refurb / add-ons
- Oil change (SAE 30, 0.5 L) — €30
- Exhaust filter replacement — €80
- Soft-starter (optional, for motor protection) — €280
Watch out for
- Surface corrosion visible; internal wear cannot be assessed from photos
- Pump age unknown; verify seal integrity before operation
WAVE AI estimate from photo + specs only — not a substitute for our physical pre-purchase check.
Specifications
- Type
- other
- Source
- eBay
- Listing #
- eBay #256634079874
- Last verified
- Aug 5, 2026
The Other family is recognised, but the exact variant is not supported. Model-specific performance and water-vapour figures from Other Busch are therefore withheld.
Price history— Busch Other
Family: OtherExact model is not supported by the listing or type plate.
Median €1.999 · 621 cleaned observations · €308–€7.200
Type plate (AI reading)
- Exact model
- Type 0116-116
- Type
- 0116-116
- Vacuum
- 2 mbar
- Motor Oil
- Type SAE 30
- Quantity
- 0.5 Ltr.
- Origin
- Made in West Germany
- Manufacturer
- Busch
- Motor Type
- FN 80
- Power
- 0.055 kW
- Speed
- 1405 1/min
- Voltage
- 220 Δ/380 Y
- Current
- 0.25 A
- Frequency
- 50 Hz
- Power Factor
- 0.75
Auto-extracted from one of the listing photos. Verify on the real unit before purchase.
What to look for on this family
Generic Busch vacuum pump — the exact model family was not detected automatically. Suitability remains unverified until the model or type plate is clear.
Traceable assessment
How each pump is assessed
AI helps read images and listing text. The final suitability result is calculated by a fixed engineering rule using evidenced values.
Method version: 5 August 2026
- 1
Identify the item
The title and photos are checked first to confirm that the listing is a complete vacuum pump — not an accessory, spare part or pump head only.
- 2
Establish evidence
The type plate and listing provide specific facts. Manufacturer values are used only for a confirmed model; family-level values stay clearly labelled.
- 3
Compare engineering data
Pumping speed, water-vapour capacity and ultimate pressure are compared with the selected WAVE machine and the chosen safety margins.
- 4
Assess condition separately
A photo or a seller saying “runs” does not replace a vacuum test. Unknown data remain unknown and never become an automatic green recommendation.