Used Vacuum Pumps›Busch›R5 RA / RB

Busch · R5 RA / RB

Busch R5 RC0630 — rotary vane, 490 CFM

Original title: BUSCH R5 RC0630 ROTARY VANE VACUUM PUMP, 490 CFM, 25HP MOTOR 15 TORR

€13.485▲ above market

Market median (sold): €2.883 from 78 sales in this family

📍 USA

🔴 Check carefully

Spec mismatch: 490 CFM (~14 m³/h) far exceeds WAVE101/FD260 needs; price 4.6× market median.

Condition from photo

Exterior shows age and dust accumulation; oil level and internal wear cannot be assessed from photos.

Likely refurb / add-ons

  • Oil change and filter service: €100–150
  • Exhaust filter replacement: €80–120
  • Soft-starter (if not present): €280–350

Watch out for

  • Asking price €13,485 is 4.6× the median €2,948 for this family; significant over
  • Pumping speed ~14 m³/h is 1.4–2.8× larger than typical WAVE101/FD260 requirement
  • No visible soft-starter or control electronics in photos; may require additional

WAVE AI estimate from photo + specs only — not a substitute for our physical pre-purchase check.

Specifications

Type
Oil-sealed rotary vane
Pumping speed
~10 m³/h
Water-vapour tolerance
~50 g/h
Ultimate vacuum
≤ 0.1 mbar
Source
eBay
Listing #
eBay #316075765883
Last verified
Jun 12, 2026

Fits WAVE machines: WAVE101, FD260

Type plate (AI reading)

Exact model
RC0630.B4Z6.1012
Serial
C 6680
Displacement
490 cm³/rev
Pumping speed (50 Hz)
1.5 m³/h
Pumping speed (60 Hz)
1.8 m³/h
Oil capacity
1/2 l
Oil capacity
1.4 l
Oil capacity
2.5 l
Oil capacity
7 l
Oil capacity
14 l
Oil capacity
16 l
Manufacturer
Hill-Rom/MEDAES
Origin
Made in USA

Auto-extracted from one of the listing photos. Verify on the real unit before purchase.

What to look for on this family

Oil-sealed rotary vane with gas-ballast. Robust workhorse. Check ballast valve is intact and oil is clear amber. Run gas-ballast open under water vapour load.

Manufacturer datasheet — Busch R5 RA / RB

Design
Single-stage oil-sealed rotary vane pump with gas ballast
Pumping speed (50 Hz)
10 – 100 m³/h (RA 0010 – RA 0100)
Ultimate pressure
≤ 0.1 mbar
Water-vapour tolerance
approx. 50 – 330 g/h
Inlet flange
DN 25/40 ISO-KF
Motor power
0.55 – 3.0 kW
Speed (50 Hz)
1500 1/min
Oil type
Busch VM 100 (mineral)
Oil fill
0.5 – 4.0 l
Oil-change interval
approx. 500 – 2000 operating hours, depending on application
Motor protection class
IP55
Manufacturer
Busch Vacuum Solutions

Curated from the manufacturer's official datasheet for this family / model. The specific pump may vary slightly by variant.

W

WAVE Advisor

Questions & advice · AI

Hi! I answer questions about freeze drying and help you choose a suitable WAVE machine. How can I help?

AI advisor · prices are indicative; a binding quote comes from the WAVE team.