Busch · Other
Busch RC 0016 B 502 — rotary vane, 149984
Original title: BUSCH Vakuumpumpe RC 0016 B 502 Vakuumpumpe 149984 - generalüberholt
📍 Germany
Suitability for 1 × FD440
Not verifiedItem type
Not confirmed
Technical
Cannot calculate
Condition
Not evidenced
Data
Family only
🔴 Check carefully
Rotary vane pump; suitable for WAVE but age and refurb status unclear from photos.
Condition from photo
Externally clean, mounted on frame with motor and inlet filter. No visible oil leaks or damage. Labels readable.
Likely refurb / add-ons
- Oil change and filter service — €80–120
- Exhaust filter replacement — €60–100
- Soft-starter (if not present) — €250–350
Watch out for
- Listing states 'generalüberholt' (refurbished) but no service documentation visi
- Age and internal wear cannot be assessed from exterior photos alone
- Pump type designation 'RC 0016 B 502' not clearly confirmed on visible nameplate
WAVE AI estimate from photo + specs only — not a substitute for our physical pre-purchase check.
Specifications
- Type
- other
- Source
- eBay
- Listing #
- eBay #196423085741
- Last verified
- Aug 5, 2026
The Other family is recognised, but the exact variant is not supported. Model-specific performance and water-vapour figures from Other Busch are therefore withheld.
Price history— Busch Other
Family: OtherExact model is not supported by the listing or type plate.
Median €1.999 · 621 cleaned observations · €308–€7.200
Type plate (AI reading)
- Exact model
- FN 80
- Serial
- 673 110
- Type
- FN 80
- Part No.
- 673 110
- VDE
- 0530
- IP
- 54
- Insulation Class
- F
- Power
- 0.55 kW
- Speed
- 1405 1/min
- Voltage
- 220 A / 380 Y
- Current
- 2.6 / 1.5 A
- Power Factor
- 0.75
- Frequency
- 50 Hz
- Oil
- ISO VG 100
- Origin
- Made in Germany
Auto-extracted from one of the listing photos. Verify on the real unit before purchase.
What to look for on this family
Generic Busch vacuum pump — the exact model family was not detected automatically. Suitability remains unverified until the model or type plate is clear.
Traceable assessment
How each pump is assessed
AI helps read images and listing text. The final suitability result is calculated by a fixed engineering rule using evidenced values.
Method version: 5 August 2026
- 1
Identify the item
The title and photos are checked first to confirm that the listing is a complete vacuum pump — not an accessory, spare part or pump head only.
- 2
Establish evidence
The type plate and listing provide specific facts. Manufacturer values are used only for a confirmed model; family-level values stay clearly labelled.
- 3
Compare engineering data
Pumping speed, water-vapour capacity and ultimate pressure are compared with the selected WAVE machine and the chosen safety margins.
- 4
Assess condition separately
A photo or a seller saying “runs” does not replace a vacuum test. Unknown data remain unknown and never become an automatic green recommendation.