Used Vacuum Pumps›Pfeiffer›Other
Pfeiffer · Other
Pfeiffer SplitFlow 310 — rotary vane, 60,000 rpm
Original title: Pfeiffer SplitFlow 310 3P PM P04 299 Vakuumpumpe TC400 PMC01800A 16989810 Used
📍 Germany
Suitability for 1 × FD440
Not verifiedItem type
Not confirmed
Technical
Cannot calculate
Condition
Not evidenced
Data
Family only
🔴 Check carefully
Rotary vane pump; not ideal for WAVE freeze dryers requiring oil-sealed rotary vane or turbomolecular sources.
Condition from photo
Exterior clean, no visible oil leaks. Nameplate legible. Mounted on aluminum frame with cooling unit. Red transport strap present.
Likely refurb / add-ons
- Oil change (PM 063 265-T) — €40
- Exhaust filter replacement — €80
- Soft-starter module (TC 400 controller) — €280
Watch out for
- SplitFlow 310 is a small rotary vane pump (60,000 rpm, ~13 kg); typical WAVE dry
- No visible ultimate vacuum specification in photos; confirm compatibility with t
WAVE AI estimate from photo + specs only — not a substitute for our physical pre-purchase check.
Specifications
- Type
- other
- Year
- 2019 (per nameplate)
- Source
- eBay
- Listing #
- eBay #256845272800
- Last verified
- Aug 5, 2026
The Other family is recognised, but the exact variant is not supported. Model-specific performance and water-vapour figures from Other Pfeiffer are therefore withheld.
Price history— Pfeiffer Other
Family: OtherExact model is not supported by the listing or type plate.
Median €1.110 · 903 cleaned observations · €374–€3.399
Type plate (AI reading)
- Exact model
- SplitFlow 310
- Serial
- 16989810
- Year (plate)
- 2019
- Manufacturer Part No.
- PM P04 299
- Oil
- PM 063 265-T
- Speed
- 60000 1/min
- Frequency
- 1000 Hz
- Mass
- 13.0 kg
- Origin
- Made in Germany
- Approvals
- CE, TÜV Rheinland
Auto-extracted from one of the listing photos. Verify on the real unit before purchase.
What to look for on this family
Generic Pfeiffer vacuum pump — the exact model family was not detected automatically. Suitability remains unverified until the model or type plate is clear.
Traceable assessment
How each pump is assessed
AI helps read images and listing text. The final suitability result is calculated by a fixed engineering rule using evidenced values.
Method version: 5 August 2026
- 1
Identify the item
The title and photos are checked first to confirm that the listing is a complete vacuum pump — not an accessory, spare part or pump head only.
- 2
Establish evidence
The type plate and listing provide specific facts. Manufacturer values are used only for a confirmed model; family-level values stay clearly labelled.
- 3
Compare engineering data
Pumping speed, water-vapour capacity and ultimate pressure are compared with the selected WAVE machine and the chosen safety margins.
- 4
Assess condition separately
A photo or a seller saying “runs” does not replace a vacuum test. Unknown data remain unknown and never become an automatic green recommendation.