Used Vacuum Pumps›Busch›R5 RA / RB

Busch · R5 RA / RB

Busch R5 RA 0025 F 503 — rotary vane, 25 m³/h

Original title: Busch Vakuumpumpe R5 RA 0025 F 503 25m3/h 1500 u/min Used

€2.260▼ 22% below market

Market median (sold): €2.883 from 78 sales in this family

📍 Germany

🟡 OK with refurb

Suitable for WAVE101/FD260; spec mismatch with listing title requires verification.

Condition from photo

Exterior clean, no visible oil leaks; motor and pump housing in good cosmetic condition; mounted on rubber feet.

Likely refurb / add-ons

  • Oil change (Busch VM 100) — €40
  • Exhaust filter replacement — €80
  • Soft-starter (optional) — €280

Watch out for

  • Listing title claims 25 m³/h; nameplate specifies max. 25 m³/h (Vmax), but typic
  • Year 2014 — pump is ~10 years old; internal wear cannot be assessed from photos.

WAVE AI estimate from photo + specs only — not a substitute for our physical pre-purchase check.

Specifications

Type
Oil-sealed rotary vane
Pumping speed
~10 m³/h
Water-vapour tolerance
~50 g/h
Ultimate vacuum
≤ 0.1 mbar
Year
2014 (per nameplate)
Source
eBay
Listing #
eBay #266460737710
Last verified
Nov 18, 2026

Fits WAVE machines: WAVE101, FD260

Type plate (AI reading)

Exact model
RA 0025 F 503
Serial
1400378874
Year (plate)
2014
Manufacturer
Busch Produktions GmbH, Maulburg, Germany
Pump Type
Vacuum Pump RA 0025 F 503
Absolute Pressure
Pabs = 0.1 hPa (mbar)
Max. Pumping Speed
Vmax = 25 m³/h
Max. Speed
nmax = 1500 min⁻¹
Oil Type
Busch VM 100
Oil Quantity
1.00 L
Weight
36 kg
Approvals
CE
Origin
Made in Germany

Auto-extracted from one of the listing photos. Verify on the real unit before purchase.

What to look for on this family

Oil-sealed rotary vane with gas-ballast. Robust workhorse. Check ballast valve is intact and oil is clear amber. Run gas-ballast open under water vapour load.

Manufacturer datasheet — Busch R5 RA / RB

Design
Single-stage oil-sealed rotary vane pump with gas ballast
Pumping speed (50 Hz)
10 – 100 m³/h (RA 0010 – RA 0100)
Ultimate pressure
≤ 0.1 mbar
Water-vapour tolerance
approx. 50 – 330 g/h
Inlet flange
DN 25/40 ISO-KF
Motor power
0.55 – 3.0 kW
Speed (50 Hz)
1500 1/min
Oil type
Busch VM 100 (mineral)
Oil fill
0.5 – 4.0 l
Oil-change interval
approx. 500 – 2000 operating hours, depending on application
Motor protection class
IP55
Manufacturer
Busch Vacuum Solutions

Curated from the manufacturer's official datasheet for this family / model. The specific pump may vary slightly by variant.

W

WAVE Advisor

Questions & advice · AI

Hi! I answer questions about freeze drying and help you choose a suitable WAVE machine. How can I help?

AI advisor · prices are indicative; a binding quote comes from the WAVE team.